1. Dimension: φ26.5* 118MM
2.Body material: Aviation aluminum
3. Surface treatment : Hard anodized black
4. Wavelength(nm) : 532nm.
5. Output power (mW) : 100mw ClassIIIB
6. Circuit control: APC
7. Spot form: single-point
8.Beam type: Continuous linear
9.Beam diameter: 10 MM <φ18MM
10.Working Current: 500mA
11.Working voltage: DC=3.0V
• 11.Trigger Voltage: DC = 2.6V
12.preheat time :0 second
13.Working temperature: 15℃-30℃
14.Store temperature: -10℃～＋40℃
15.Power supply: CR123A*1
16.Pakage：3.0V battery*1 recharger*1
17.The Battery can be Charged no more than an hour ,in order to avoid damage to the battery.
1. The polarity of the battery according to the diagram loaded into the flashlight tube body (do not hold against) lock tailstock start switch glows green
2. Recommended 3V rechargeable lithium battery, more stable performance.
3. Continuous 100mw laser light time suggested- not more than 30 seconds
4. It is waterproof,if it is used for diving, be sure to check whether the shell of each component locking
5. If the lens gets dirty, tweezers remove lens washed with water, loaded on to dry.